How To Reset Pentair Variable Speed Pump

Pentair IntelliFlo Variable Speed Pump is one of the all-time pumps that yous can utilize for your puddle, cleaner, waterfall, spa, and other water uses. Using its command console, you can easily set up and reset the 4 selectable preset speeds or set the pump speed to run at a certain speed.

The unit of measurement comes with variable speed that y'all tin use to savour up to viii speeds which y'all tin can adjust to run at specific time intervals. Hence, the IntelliFlo Variable Speed Pump is a slap-up pump that cannot be matched by rivals in its class.

This article looks at how you tin set and reset the Pentair IntelliFlo Variable Speed Pump.

How to Set the Variable Pump Preset Speed

This model operates using whatsoever of the preset speeds that are set in the factory. You tin can easily apply its control panel button to preset or fifty-fifty reset your preferred speed.

Follow these steps:

Make sure that your variable pump is on – this ways ensuring that the light-green ability LED is turned on.
Printing your desired speed push (from 1 to 4) for about 3 seconds to choose the preset pump speed to reset the speed.

You lot volition be choosing amidst these four speeds:

Speed 1 LED/button will select the first speed which is 750 RPM.
Speed 2 LED/button will select the second speed which is 1500 RPM.
Speed 3 LED/button will select the third speed which is 2350 RPM.
Speed iv LED/button will select the fourth speed which is 3110 RPM.

You tin press the start button to assign the selected speed if necessary.

How to Adjust the Pump Speed

You tin can easily reset the IntelliFlo Variable Speed Pump to operate at any speed from 400 RPM to 3450 RPM. Follow these steps to choose your preferred speed:

Make sure that the pump is on by ensuring that the LED ability is on.
If the pump isn't running, press the start push button to power it on.
Press the down or upward button to subtract or increase the pump speed.

You tin choose:

Effect 10 RPM increments by pressing and rapidly releasing the downwardly/up to decrease or release the pump speed.
Event 20 RPM increments past pressing and holding the down/upwards push button to steadily decrease or increase the pump speed.

Save the speed you accept chosen past pressing and holding the speed buttons to allocate that speed. You can easily assign upward to four new speeds.
Press the push of the speed you take assigned to ensure that your unit runs with that speed.

IntelliFlo Variable Speed Pump Factory Resetting

You can besides reset your pump to its manufacturing plant settings. This way, you will erase all the settings that you have made to the unit of measurement.

Simply follow these steps to factory reset your unit:

Make sure that the pump is on.
Press the finish button – the pump will terminate.
Press and hold the four buttons simultaneously for almost 4 seconds. Power off the unit of measurement and restart.
The manufactory settings will be in assigned.